Jensen Swing Steel Pipe Swing Hanger is 4 1/2” O.D. with a 14.1” circumference. The lower half of the swing hanger body has a figure eight pendulum with a sintered bronze bearing incorporated into it, to reduce wear. The pendulum is 1” wide and is a completely closed figure eight so that the connecting S-hook or shackle can not be dislodged from the hanger. The two halves of the hanger are bolted together with a 12mm carriage bolt with a hex lock tight nut. The pendulum is held to the hanger with a #12 axle bolt with a long shoulder so the bearing does not ride on the threads. It also has a lock tight nut.
- These swing hangers feature an “oil-lite” bronze bearing and axle bolts with lock tight nuts
- The stamped steel has more ability to bend, so they will not snap when torqued too tightly
S-Hooks that can be used from chain to swing hanger:
- H140 – 5/16″ Large End S-Hook
- H145 – 5/16″ Standard S-Hook
- H150 – 3/8″ Large End S-Hook
- H155 – 3/8″ Standard S-Hook
H-Shackle that can be used from chain to swing hanger: